Custom-brackets Yuri Arcurs SteadyPod AS Basic User Manual download pdf

Figure #3

Two screws for

mounting CMP

Attaching your camera to the CMP

Camera with add on vertical grips or battery packs

Remove the anti-twist posts using the Allen

wrench (5/64”) provided with the bracket. Refer

to picture at the top of this page (gure #4).

2 -

Attach your camera with lens toward vertical plate. Once the “D” style camera screw is tightened,

loosen 1/2 turn.

Turn the adjusting screw counterclockwise with a Phillips screwdriver to move the camera screw

plate forward until the camera touches the vertical plate. Then turn an additional 1/4 turn.

Tighten the “D” style camera screw completely.

4 -

5 -

6 -

Remove the “D” style camera screw and install from opposite side as shown.

3 -

Camera without add on vertical grips or battery packs

Attach your camera with lens toward the

anti-twist posts. Once the “D” style camera

screw is tightened, loosen 1/2 turn (gure #2).

Turn the adjusting screw counterclockwise using a Phillips screwdriver to move the camera

screw plate forward until the camera touches one of the anti-twist posts. Then turn an additional

1/4 turn (make sure camera is facing straight forward).

Tighten the “D” style camera screw completely.

Camera screw plate

Adjusting Screw

“D” style camera screw

Vertical plate

2 -

3 -

4 -

(2) Anti-twist posts

Loosen second anti-twist post (if it is not touching the camera) using the same Allen wrench

(5/64”) and move it until it touches the camera and then tighten.

5 -

Attach the camera plate (CMP) to the bracket

using the two screws (8-32 threads x 1/2” long

socket head) and Allen wrench (5/64”) supplied

with your bracket (gure #1).

1 -

Figure #1

Two screws for

mounting CMP

Camera screw plate

Adjusting Screw

“D” style camera screw

Attach the camera plate (CMP) to the bracket

using the two screws (8-32 threads x 1/2” long

socket head) and Allen wrench (5/64”) supplied

with your bracket (gure #3).

1 -

Figure #2

Figure #4

Yuri Arcurs SteadyPod

BRACKET INSTRUCTIONS

phone 800.530.2289

website: www.steady-pod.com

email: [email protected]

32 Alpha Park

Cleveland, Ohio 44143

Made in USA

U.S. Patent 6,354,544

Attaching the camera quick release (QR-C kit, QR-C, C-SP)

Attach the camera quick release (QR-C) to the bracket using the two screws (8-32 thread x 1/2” long

socket head screw) and Allen wrench (5/64”) supplied with your bracket (gure #5)

C-SP attached to CMP

for tall cameras and

cameras with vertical

grips / battery packs

C-SP attached to CMP

for short cameras and

cameras without vertical

grips / battery packs

Figure #6

Figure #7

Figure #5

Push bar

2 - Slide C-SP in

from above

1 - Push the

push bar in

Attaching the camera bottom plate (CBP)

Attach the camera bottom plate (CBP) to the CMP using the two screws (8-32 threads x 1/2” long

socket head screw) supplied with your CBP and Allen wrench (5/64”) supplied with your bracket.

Figures #8 and #9 are showing the CMP up-side-down with the CBP attached

CBP attached

to CMP for tall

cameras and

cameras with

vertical grips /

battery packs

CBP attached

to CMP for short

cameras and

cameras without

vertical grips /

battery packs

Figure #8

Figure #9

CMP

CBP

Two screws for

mounting CBP

Attach the camera subplate (C-SP) to the camera mounting plate (CMP) using the two screws

(8-32 threads x 5/16” long socket head screw) supplied with the C-SP and Allen wrench (5/64”)

supplied with your bracket per either gure #6 or #7.

Attach your camera per the CMP instructions.

While pushing in the push bar on the QR-C (step 1 in gure #5), slide the C-SP (attached to the CMP)

downwards into the QR-C (attached to the bracket) (step 2 in gure #5). The push bar on the QR-C

needs to be pushed in when attaching and detaching the C-SP.

Attaching the bracket to the tripod quick release (QR)

Figure #10

Figure #11

Attach the bracket to the QR by pushing in the push bar (step 1 in gure #10), and while

holding the push bar in, slide the bracket into the QR from the front (step 2 in gure #10).

Figure #11 shows the bracket in the quick release.

2 - Slide bracket in

from front side

1 - Push in the

push bar

Push Bar

1 2

Summary of Contents

Page 1 - BRACKET INSTRUCTIONS

Figure #3Two screws for mounting CMPAttaching your camera to the CMPCamera with add on vertical grips or battery packsRemove the anti-twist posts usi

Page 2 - Attaching the Foot Shield

Quick Release push barTilt lock knobRotate knob counter-clockwiseto tightenTilt drag knobRotate toverticalBase(4) Retaining screw locationsPlace the

Comments to this Manuals

No comments

Custom-brackets Yuri Arcurs SteadyPod AS Basic User Manual

Browse online or download User Manual for Accessories for video Custom-brackets Yuri Arcurs SteadyPod AS Basic. Custom Brackets Yuri Arcurs SteadyPod AS Basic User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for video Custom-brackets Yuri Arcurs SteadyPod AS Basic